[Amps] Ceramic Coupler

[carl seyersdahl]

Bob: If your coupler ends have enough meat you can drill out one side 1/8
in. Do it carefully with a sharp drill.!! I've done that a couple times and
if done carefully it will work fine !!!
   carl / kz5ca
----- Original Message ----- 
From: "Bob Maser" <bmaser at tampabay.rr.com>
To: "AMPS" <amps at contesting.com>
Sent: Sunday, June 05, 2005 11:12 AM
Subject: [Amps] Ceramic Coupler


> I am modifying my amp by installing a Johnson 226-3 roller inductor in the
> tank circuit.  It has a 3/8" shaft and I am trying to mate it with a
Johnson
> turns counter, which has a 1/4" shaft.  I have searched thru my junk pile
> and cannot come up with a coupler.  Anyone out there have a spare 3/8 to
1/4
> coupler?
>
> Thanks,
> Bob W6TR
>
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>