[Amps] SELL: Laboratory 0-400W Metered Dummy Load

[w2cqm@juno.com]

Offering a bench top, highly accurate, laboratory quality  0-400 watt
metered 52 ohm  HF dummy load manufactured by the Electronic Assistance
Corp.  The four (4)  load resistors are (green enameled) noninductive RF 
type and wired in parallel to handle the power.  Rear cabinet input is an
"N" connector. There is a front panel BNC connector coupled to a variable
capacitor for simultaneously monitoring of the signal with an
oscilloscope.  Unit tested to 30mHz with better than 5% accuracy. Sloping
black crinkled finished cabinet measures 8"x8"x9". The 3" RF meter is
calibrated with a scale of 0-400W for reading  power output  directly.  
A  schematic diagram of  the dummy load is etched on an OEM phenolic
board and attached to the rear of the unit for reference.   $55+ shipping
(7 lbs from zip 18426) Ron W2CQM/3 

http://swap.qth.com/segamida/474529.jpg