[Amps] mobile amp

[Tomm Aldridge]

Note they also have ferrite rods at the bottom of the referenced page. 
Good for filament chokes.  Note also that I have refrained from making 
any vibrator jokes (hi hi).

Tomm

Will Matney wrote:
> I had to tell about what I'd found for several reasons here. I got to looking and found that they still make the old 6 and 12 Vdc 3 and 4 pin vibrators. I recon theyre still making some new sockets for them too. Now if anyone would like to do a small mobile tube project, this would be a way to go like back in the 40's. They'll also go right in place on the old ones for repairs. I seen they're still around and thought of a small single sweep tube amp or something using a audio output type just playing around. Heck, they're making 6146B's yet at the cheap, about 16-17 bux a piece. Now they wont hold much current, I think maybe 10 amps max so about 120 watts would be pusing one. But, if your looking for a small project to just pass the time and want to work with some smaller tubes, that would be an idea. One could use the vibrator to switch several heavy transistors on and off using a small driver transformer between it and the transistors. This would get you out of having to
 ha
>  ve a transformer made for this with a tickler winding on it. Just use a 24 Vdc C.T. for the primary and the 120 Vac end for the HV secondary. This could be made into a doubler too and get about +336 Vdc for the plates. Just an idea if somebody would like to tinker some on their past time.
> 
> The new vibrators are at Antique Electronics. Here is a link to the catalog page for them in pdf;
> 
> http://www.tubesandmore.com/images/AES04-039.pdf
> 
> Best,
> 
> Will
> 
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>