[Amps] RE : power transformer

[hermans]

The only way we had to produce Higher voltage at low cost fourthy years
ago..........( I just remember my coaxial cavity with a 4X150A on 144
Mc/s
Supose transformers, unless army surplus, are not cheaper nowadays.

Jos ON4KJ

-----Message d'origine-----
De : amps-bounces at contesting.com [mailto:amps-bounces at contesting.com] De
la part de Tom Bowman
Envoyé : dimanche 6 novembre 2005 12:38
À : amps at contesting.com
Objet : [Amps] power transformer


I'm looking for parts to build an inexpensive amp.
I'm thinking about using a pair of 811 tubes because the price is right.
Now the transformer problem: I have an unused TV transformer and would
like your opinions on whenther or 
not it would work for SSB service using the pair of 811s. Transformer
has two plate windings, 300-0-300 volts at 250 madc and 
250-0-250 volts at 280-0-280 madc, plus the usual 5 and 6.3 volt
windings. I figured with a full-wave voltage doubler I would be close to
1700 volts. But would the transformer rated 250 ma be sufficient for SSB
service???

73,
Tom WA3REY 

_______________________________________________
Amps mailing list
Amps at contesting.com http://lists.contesting.com/mailman/listinfo/amps