[Amps] 220V wiring: Was Question about safety ground connection
Gudguyham@aol.com
Gudguyham at aol.com
Wed Nov 16 09:55:26 EST 2005
In a message dated 11/16/2005 9:50:04 AM Eastern Standard Time, r at somis.org
writes:
In a SB-220 or a TL-922, it's Yes, yes, yes! because there is no
connection between the 120v fan and either side of the 240V input.
Instead, the fan is powered by one of the 120v primaries of the xfmr.
>
Yes there is....the Sb-220 fan runs off one side of the 240 leg WHICH IS
120V and the center tap of the dual primary 120v windings. When the amp is
configured for 240 operation. When used on 120v config. there is a nuetral .
More information about the Amps
mailing list