[Amps] sb200 warc bands

[Jan Erik Holm]

almacottage wrote:
> hi .
> 
> the sb200 will run on 12m from the 10m bandswitch position and on 17m in the 15m position .
> 
>  power may be slightly less than on the bands selected but will still be over 600w with 90w drive .
> 
90W drive is too much for a SB-200. Great chance you will make splatter.
 >
> 30m is a bit iffy if you try tuning it in the 40m section , i did try once but the amp took off on its own , so hence i decided it was no go on 30m .
> 
> obviously youll need to readjust plate and load tuning from theyre respective 10m and 15m settings in order to run the 2 warc bands .
> 
> 73 , ian m0bcg 
>
73 Jim