[Amps] SB200 loading problem

[John Parkins]

Hello Stan,

Yes I have tried it into a dummy load and the loading is the same. I
run resonant antennas on both 80 & 40 so I don't think that's the
problem either.


Monday, September 19, 2005, 10:04:25 PM, you wrote:

SS> Did you try it into a 50 ohm dummy load and see if you got the same results?
SS> If it works on the dummy load, then check the antennas with an analyzer and
SS> see what they look like.

SS> Stan

SS> ----- Original Message ----- 
SS> From: "John Parkins" <kvp at bigfoot.com>
SS> To: "Amps Listserver (contesting.com)" <amps at contesting.com>
SS> Sent: Monday, September 19, 2005 3:34 PM
SS> Subject: [Amps] SB200 loading problem


>> Hello All,
>>
>> The loading control on my SB200 is hard over anti-clockwise, i.e. max
>> capacity on both 80&40 so I can't ever tune through a peak as such.
>> Any ideas why this might be or what I can do to to get round the
>> problem?
>>
>> I wonder if another user could let me know where their control is set
>> for these two bands mainly to see if this is a general problem.
>>
>>
>>
>> -- 
>> Best regards,
>> John G8KVP                         mailto:kvp at bigfoot.com
>>
>> _______________________________________________
>> Amps mailing list
>> Amps at contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>> 




-- 
Best regards,
 John                            mailto:kvp at bigfoot.com