[Amps] [BULK] - Re: SB200 loading problem

[John Parkins]

Hello Phil,

I'll add it to the list of things to do next time the amp is on the
bench, thanks.

Tuesday, September 20, 2005, 10:33:42 PM, you wrote:

PC>  
>> I had the same thought about 80 and the extra 'C' and changed it out
>> for a new one, I also tried increasing it's value and checked the
>> switch out but although everything was fine I still get the problem.
>> 
>> I've also tried switching the valves around, I have a spare set and
>> that did nothing at all either. You can see why I'm confused!
>> 
>> 
>> --
>> Best regards,
>>  John                            mailto:kvp at bigfoot.com

PC> John,
PC> Check out your anode RF Choke. If it has lowered in value (L) this could be
PC> the cause of trouble.

PC> (((73)))
PC> Phil, K5PC





-- 
Best regards,
 John                            mailto:kvp at bigfoot.com