[Amps] working backwards to setup tank
Phil Clements
philc at texascellnet.com
Tue Apr 18 18:29:40 EDT 2006
> > I set this tank circuit up and tuned at 7.250mhz, came up with a
> beautiful
> > output
> > then tried to do the reverse check. I put a 2k resistor from the plate
> to
> > ground, hooked
> > the MFJ analizer up using the settings previously obtained and for th e
> > life of me cannot find
> > a good resistive value to make the swr analizer 1:1 swr or close. I used
Is your antenna relay keyed up or jumpered?
(((73)))
Phil, K5PC
More information about the Amps
mailing list