[Amps] grid resonance

[Will Matney]

Chirs,

Below is a link to a PDF by Tektronix titled "XYZs of Signal Sources"
It may be of some help. They ask for your life history almost before
you can download it, but you can give it erroneous info and not worry
about it. I always do to stop the spam.

http://www2.tek.com/cmswpt/tidetails.lotr?ct=TI&cs=Primer&ci=2323&lc=EN

Best,

Will

*********** REPLY SEPARATOR  ***********

On 8/3/06 at 5:46 AM Chris Howard wrote:

>Thanks!
>
>
>On Wed, 2006-08-02 at 23:14 -0400, Will Matney wrote:
>> Chris,
>> 
>> Generally, a "leveled signal" is a signal that does not vary over its
>entire bandspread. In other words, it will have the same peak to peak
>voltage sine wave over the span. They make speacial AF and RF frequency
>generators for this (Leveled RF Generator). Hopefully, someone will put up
>my posts I made early this morning and tonight.
>> 
>> Best,
>> 
>> Will
>> 
>> *********** REPLY SEPARATOR  ***********
>> 
>> On 8/2/06 at 9:04 PM Chris Howard wrote:
>> 
>> >On Wed, 2006-08-02 at 21:26 -0400, Tom W8JI wrote:
>> >
>> >> 
>> >> If you apply a leveled source to the cathode 
>> >
>> >Pardon my ignorance.  What does "leveled source" mean?
>> >
>> >_______________________________________________
>> >Amps mailing list
>> >Amps at contesting.com
>> >http://lists.contesting.com/mailman/listinfo/amps
>> 
>> 
>>