[Amps] band decoders for 1.5kw low pass filters

[Peter Voelpel]

Probably you are using the low power filters

73
Peter

-----Original Message-----
From: amps-bounces at contesting.com [mailto:amps-bounces at contesting.com] On
Behalf Of PA3DUV
Sent: Samstag, 5. August 2006 19:05
To: mike kendall; amps at contesting.com
Subject: Re: [Amps] band decoders for 1.5kw low pass filters

The W3NQN filters from Array can handle 200 watt SSB only, barely enough for

QRP. I use them for my multi TRX Winlink station, they perform very well.