[Amps] Fw: grid resonance

[Mike(W5UC) & Kathy(K5MWH)]

 I'm wondering if this horse still flinches when someone kicks it.
 
 73,
 Mike, W5UC
 http://members.cox.net/w5uc
 
 ----- Original Message ----- 
 From: "Bill Turner" <dezrat at copper.net>
 To: "Joe Subich, W4TV" <w4tv at subich.com>
 Cc: "'Ian White GM3SEK'" <gm3sek at ifwtech.co.uk>; <amps at contesting.com>
 Sent: Tuesday, August 08, 2006 12:41 PM
 Subject: Re: [Amps] grid resonance
> 
> 
>> ORIGINAL MESSAGE:
>> 
>> On Mon, 7 Aug 2006 13:19:30 -0400, you wrote:
>> 
>> <snip>
>>>Quite simply, the dip meter does not tell you what is really being 
>>>measured.  Unless the measurement is of two high quality components 
>>>in total isolation, anyone who reports dipmeter test results without 
>>>accurately reporting the test conditions is being deceptive. 
>>>
>>>73, 
>>>
>>>   ... Joe, W4TV 
>>> 
>> 
>> ------------ REPLY SEPARATOR ------------
>> 
>> Precisely. Thank you Joe.
>> 
>> Bill, W6WRT
>> _______________________________________________
>> Amps mailing list
>> Amps at contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>