[Amps] AL-1200 Low High Voltage (HV)
Bill Turner
dezrat at copper.net
Mon Aug 21 09:15:52 EDT 2006
ORIGINAL MESSAGE:
On Mon, 21 Aug 2006 07:27:49 EDT, Gudguyham at aol.com wrote:
>
>Just for the record an Al-1200 with a good tube and normal plate voltage
>(about 3600V) could be a little higher with higher main voltage, the amp should
>produce about 1800 output with 100 watts drive.. If you are getting only
>1200 or so, that is LOW.
------------ REPLY SEPARATOR ------------
FWIW, I could never get more than about 1300 watts out of my AL=1200
with 100 watts drive. I used two different transceivers and two
different power meters.
--
Bill, W6WRT
More information about the Amps
mailing list