[Amps] B & W 850A Tank Coil

[aborg]

Good idea. This site is great for innovative ideas.
Thanks
**************************************************
--- Chris Howard <chris at yipyap.com> wrote:

> 
> I have a large AM transmitter that uses HDVL B&W
> coils in the output.
> When I got the thing, a couple of the coils looked
> like they had been
> sat on or something.
> 
> I was able to use nylon string to sort of sew up the
> wayward coils,
> straightening them out and making an 'X' of the
> nylon string between
> the turns about 3-4 different places around the
> circumference.  I could
> regulate how close the turns got by how hard I
> pulled on the string.
> When done, I used 5min epoxy to seal the nylon
> string in place.
> 
> It seems to have worked pretty well.
> 
> I suppose you could also use some weedwhacker nylon
> line as
> spacers if necessary, to get the right spacing.
> 
> Chris
> w0ep
> 
> 
> 
> On Thu, 2006-12-14 at 08:09 -0800, aborg wrote:
> > Hello Group,
> > 
> >    Anyone have any tips, resources, ideas or
> templates
> > to restore the coil separating ribs for the B & W
> tank
> > coils ? I called B & W they acted liked I had the
> > plague. I should have come here first anyway.
> > Thanks
> > 
> > 
> > 
> > 
> > 
> >    
> > 
> > Mike-KK4MS
> > a_borg at yahoo.com
> > 
> > 
> >  
> >
>
____________________________________________________________________________________
> > Cheap talk?
> > Check out Yahoo! Messenger's low PC-to-Phone call
> rates.
> > http://voice.yahoo.com
> > _______________________________________________
> > Amps mailing list
> > Amps at contesting.com
> > http://lists.contesting.com/mailman/listinfo/amps
> 
> 


Mike-KK4MS
a_borg at yahoo.com


 
____________________________________________________________________________________
Yahoo! Music Unlimited
Access over 1 million songs.
http://music.yahoo.com/unlimited