[Amps] MLA2500 10 Meter Mod

[Joe Subich, W4TV]

Bob, 

The original MLA-2500 predated the FCC restriction.  The MLA-2500B 
came after the change in the rules - it deleted the high/low voltage 
switch on the transformer added a stop to the bandswitch and added 
a bandstop/lowpass filter in the input. 

The 10 meter conversion for the MLA-2500B involved removing the stop 
to the bandswitch and wiring around the input filter. 

73, 

   ... Joe, W4TV 
   

> -----Original Message-----
> From: amps-bounces at contesting.com 
> [mailto:amps-bounces at contesting.com] On Behalf Of Bob Maser
> Sent: Sunday, December 17, 2006 8:20 PM
> To: AMPS; WB6WCW at aol.com
> Subject: Re: [Amps] MLA2500 10 Meter Mod
> 
> 
> Come to think about it, weren't the MLA2500's made before the 
> 10 meter restriction?
> Bob
>   ----- Original Message ----- 
>   From: WB6WCW at aol.com 
>   To: bmaser at tampabay.rr.com 
>   Sent: Sunday, December 17, 2006 8:13 PM
>   Subject: Re: [Amps] MLA2500 10 Meter Mod
> 
> 
>   Bob:
> 
>   Make sure the bandswitch goes past the 15 meter position, 
> into "10" meters, and insure that a wire goes from the 10 
> meter switch position to the plate coil.
> 
>   Bill W6FF
>   Santa Barbara, CA. 
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> 
>