[Amps] RE : RFI Question

[hermans]

I agree with Bill, the iron-clad rule " NEVER TOUCH ".
What can be done; buy such a cheap (Chinees) decice, make it RF free,
which probably can be done with a couple of caps. Resistors and or ferit
beads. Then show your neighbour you dont have the troubles he mentioned.
Send him back to the vendor.......
    
Jos on4kj 


-----Message d'origine-----
De : amps-bounces at contesting.com [mailto:amps-bounces at contesting.com] De
la part de Bill Turner
Envoyé : samedi 4 février 2006 3:22
À : K6QD; amps at contesting.com
Objet : Re: [Amps] RFI Question


ORIGINAL MESSAGE:

At 01:22 PM 2/3/2006, K6QD wrote:

>Opening the box, I find one IC (8-pin mini-dip), one TO-220 (appears
>to be a pass transistor - nomenclature: "BT136", "600D") and 
>multiple R, C & diodes on a single-sided PCB.


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

I know you didn't ask this, but the ironclad rule in RFI 
troubleshooting is to NEVER open up the complainant's equipment. If 
you do you will forever after be blamed for any and all malfunctions.

I hope it's not too late.

73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps