[Amps] Plate Load
Mike(W5UC) & Kathy(K5MWH)
w5uc at cox.net
Sat Jul 1 16:21:38 EDT 2006
Ok, then what happens if the tank circuit is designed to match the Plate
impedence?
http://members.cox.net/w5uc
----- Original Message -----
From: "Tom W8JI" <w8ji at w8ji.com>
To: "Mike(W5UC) & Kathy(K5MWH)" <w5uc at cox.net>
Sent: Saturday, July 01, 2006 3:19 PM
Subject: Re: [Amps] Plate Load
>> While we are exercising all of this grey matter on IMD etc, please allow
>> me to ask a similar question. If the calculated Plate load Impedence is
>> 1333 ohms, and the tank circuit looks more like 2100 ohms, how does this
>> affect efficiency?
>
> Linearity will probably be poor. Efficiency will be high.
>
>
More information about the Amps
mailing list