[Amps] 4CX10 000J

[Peter Voelpel]

Why not, 
if you don´t bother the power bill you can easily achieve a super clean
legal limit signal which will be much better then any ham linear.
Of course it needs to be be driven by a transmitter with best purity,
perhaps the PT-8000C could be nice or a Racal MA1723 with a 4CX350J or
YL1050 in class A as the driver ;-)

73
Peter, DF3KV

-----Original Message-----
From: amps-bounces at contesting.com [mailto:amps-bounces at contesting.com] On
Behalf Of Jan Erik Holm
Sent: Sonntag, 2. Juli 2006 17:55
Cc: amps at contesting.com
Subject: Re: [Amps] 4CX10 000J

surely no ham would use a thing like that, or?

/ Jim SM2EKM
----------------

Peter Voelpel wrote:

> All the J-types are low distortion, gain of both is about 20db
> 
> 73
> Peter, DF3KV
> 
> -----Original Message-----
> From: amps-bounces at contesting.com [mailto:amps-bounces at contesting.com] On
> Behalf Of Joe Subich, W4TV
> What are the differences between the 4CX1000J and 4CX10000D - 
> particularly to explain the 10 KW vs. 15 KW output difference 
> in the "normal operation" figures on the Eimac short form 
> catalog (www.cpii.com/eimac)?  Of course, with a listed gain 
> of 4.5, it would seem to take 2500 W or so to drive either of 
> them to their full capability ... 
> 


_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps