[Amps] Maximum RF output in practical application: 4-250A

[Peter Chadwick]

Tom said:
>What we need to do in amateur service is just set a 
bandwidth limit. If you are below such a signal level at 
3kHz on SSB, you can be doing anything you want in that 
3kHz.<
You need a bit more of a spectral mask than just a bandwidth limit to ensure that Out of Band and Spurious Emissions (defined as per ITU Rec. SM329)
are adequately suppressed. That's why ITU have a 'necessary bandwidth' and an 'occupied bandwidth'. Given that caveat, I agree.
Time was when someone told that they were splattering would do something about it. These days, too many don't know what to do and don't care.....
73
Peter G3RZP