[Amps] Safety grounding - was Mains Isolation Transformer
R L Measures
r at somis.org
Tue Jul 4 13:25:05 EDT 2006
On Jul 4, 2006, at 9:18 AM, Gudguyham at aol.com wrote:
> In a message dated 7/4/2006 10:12:30 A.M. Eastern Standard Time,
> amps080605 at w4zt.com writes:
>
> Lou, that wouldn't necessarily be true. If you had a 240 Volt device
> that didn't have any 120 Volt needs at all, you would still HAVE
> to use
> that plug to get the power from the generator.
Bingo
> In that case, two
> conductors would have zero current. You either put the correct 4 pin
> plug on your three wire cord or make an adapter.
> STRICTLY SPEAKING A DEVICE THAT REQUIRES NO NEUTRAL AND IS 240V
> WOULD ONLY
> HAVE A 3 WIRE PLUG ON IT.
Newer electric range plugs and sockets have 4-conductors.
> ...
R L MEASURES, AG6K. 805-386-3734
r at somis.org
More information about the Amps
mailing list