[Amps] transformers

[Peter Voelpel]

Very unlikely that measurements were correct, at 1812W input you never will
get 1700W output.
The plate current meter should kick to its stop then

73
Peter


-----Original Message-----
From: amps-bounces at contesting.com [mailto:amps-bounces at contesting.com] On
Behalf Of Keith Dutson

I had an L4B that put out 1700W PEP as measured by an Alpha 4510 wattmeter
using 150 watts drive as read on the exciter meter.  The anode voltage was
about 2500 as read on the L4B meter.  Also, the grid and plate current
showed 190ma and 725ma respectively, again on the L4B meter.