[Amps] GS35 anode cooler

[Steve Thompson]

DEHAYS Dominique wrote:
> Hi everyone on here ,
> 
> Question : what is the maximum temperature a GS35 tube anode  copper 
> cooler can go  in operation ?
>  I just want to know if it is possible to solder a brass piece on it using 
> classical solder flux( 60 tin/40% pb) , or maybe the new one without pb 
> (220°) , or is it mandatory to do brazing here?
The data sheet at http://frank.pocnet.net/sheets/018/g/GS35B.pdf says 
200C maximum temperature for the anode. For best lifetime use enough air 
to keep the anode well below the temperature where solder will melt.

Soldering to the anode cooler is easier if you remove the cooler and 
pre-heat it in the oven.

steve