[Amps] Henry 4K-Ultra Schematic Error

[m.ford]

Hi Bob,

Thanks again for the Tek 130. Caled up real nice.

If one of the resistors is three times the power rating, would
physical placement not give any clue?

The NCL2K had a similar error but Rich fixed it with whiteout.

Mike  k1ern


----- Original Message ----- 
From: "Bob Maser" <bmaser at tampabay.rr.com>
To: "AMPS" <amps at contesting.com>
Sent: Wednesday, June 28, 2006 10:24 PM
Subject: [Amps] Henry 4K-Ultra Schematic Error


>I didn't get any replies to my original post so here it is again.
> 
> On the schematic of the power supply (page 25) it shows that R112 is 15 ohms
> 75  watts and R113 is 75 ohms 25 watts.  On the list of parts on page 20
> R112 and R113 are listed with the values reversed.  Which is correct?
> 
> 
> It's strange how some people carry on and on and on with some of these 
> worthless threads and yet ignore some inquiries that could be easily 
> answered.  I don't have the statistics but it seems to me that the number of 
> posts on this AMPS reflector has quadrupled during the last year.
> 
> 
> Bob W6TR 
> 
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> 
> 
> 
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.394 / Virus Database: 268.9.5/377 - Release Date: 6/27/2006
> 
>