[Amps] Trouble in pileups?

[Mark Hill]

Steve,

Thanks for the gen.  That's one of my 16A mains breakers allocated then!

(Of course, I wouldn't even contemplate using such a valve as it's 
heater power exceeds the UK, +26 dBW power limit, whereas my 3CX3000 
is under by a full 10W!)

Regards.

Mark.

-----------------------------------------
At 11:14 10/03/2006, you wrote:


>Mark Hill wrote:
>>Steve,
>>Nice idea - must look up what electric is required to light up the heater!
>
>It's a bright emitter - 15V/165A
>
>Steve

*******************************************
Mark Hill - G4FPH
E-mail: g4fph at mjha.co.uk
Current web pages at: www.g4fph.net
Old web pages at: www.qsl.net/g4fph
----------------------------------------------------------------------
Dipoles resonant on 1942 / 3720 / 7085 kHz
Three element wire beam coming soon on 14180 kHz!
----------------------------------------------------------------------
Remember - SIDE for HV safety:
S witch off
I solate
D ump
E arth
*******************************************