[Amps] Transformers in series

[KD7QAE]

Bill Turner wrote:

True.  There are safety concerns to be sure but no operational 
requirements.  I would worry much about the primary to secondary and 
secondary to core insulation strength in this application and assure 
myself that at the worst case operating conditions I had a 2:1 safety 
margin.

>ORIGINAL MESSAGE:
>
>At 01:32 PM 3/12/2006, KD7QAE wrote:
>
>  
>
>>There is NO requirement that cores be grounded to operate.
>>    
>>
>
>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>Other than common sense.
>
>Imagine working on a unit with an ungrounded core which has somehow 
>developed a short between core and winding, or where the core has 
>accidentally come in contact with a live wire.
>
>It could be your last repair job ever.
>
>Bill, W6WRT
>
>_______________________________________________
>Amps mailing list
>Amps at contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
>
>  
>