[Amps] Amp faceplates

[k7rdx]

Most modern sign shops can make nearly any design you might need for that
project and the results are very pro looking.Call around and ask. The
Brother laser label makers with clear tape look nice too,although the tape
is somewhat expensive...Jim...
----- Original Message ----- 
From: "Bill Turner" <dezrat at copper.net>
To: <craxd1 at verizon.net>; <amps at contesting.com>
Sent: Sunday, March 19, 2006 8:25 AM
Subject: Re: [Amps] Amp faceplates


> ORIGINAL MESSAGE:
>
> At 02:15 PM 3/17/2006, Will Matney wrote:
>
> >All,
> >
> >Would there be a good market in clear press-on labels that have both
> >switch text, and dial markings to fit amps or other amateur
> >equipment? These would be permanent labels, and not the rub-on type
> >like Damark. These would have a paper back that you peel off and
> >place the plastic film lable on like a sticker. They would be clear
> >to show through the paint behind. These could be done in any color
> >other than white text-markings. I'm thinking about awful seriously
> >having these if they will sell. Any thoughts are welcome.
>
>
> *********** REPLY SEPARATOR ***********
>
> I'd be interested. Would these be limited to stock designs or could
> they be made to individual specs?
>
> Also, what kind of ink/toner would be used for the text? Waterproof?
> Is the text directly on top of the sticker or covered with a protective
film?
>
> Bill, W6WRT
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps