[Amps] AL80A

[Peter Chadwick]

Rich said:
>Such a limiter requires a 240v plug, a 240v socket, a 10 by 12 
or so inch square of 3/4" plywood, two Edison medium screw-base lamp 
sockets, #16 wire, and two 300W 120v incandescent lamps.<
Good heavens, Rich, that's far too old fashioned for the modern digital age! You have to keep up with the times, so you need a box of digital electronic gadgetry controlled (if you're lucky!) by a PC running complicated software that nobody (not even the writer of it) really understands, and with the capability of failing and letting the full fault current of the mains into the amp under test.
I just use a lamp myself.........
73
Peter G3RZP