[Amps] 813's

[GGLL]

	So as long as the filament is contained in the vertical plane, any tilt 
position of the tube is ok. At least for a fix (not mobile) use.

Best regards
Guillermo - LU8EYW.

Peter Chadwick escribió:
> Not only did Collins (amongst many others) run 813s in the horizontal position, there was even a Collins civil aircraft TX of the late 40s, early 50s which used an 813 at an angle of about 60 degrees or so, to keep the total height down. I saw one at Dayton the other year.
> 73
> Peter G3RZP
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>