[Amps] FET EER CLASS E

[Jim Tonne]

Trent:

For Class E go here:
http://tonnesoftware.com/classe.html

Be advised that EER must either use a very wideband
PWM system to minimize loss of sideband suppression
due to time delay mismatch in the two channels, or else
add a time delay to the RF channel.  Sounds easy but
it is a difficult path.

For an appnote with lots of graphics illustrating the PWM
system, go here:
http://tonnesoftware.com/appnotes/pwm/pwmham.html

Good luck!

- Jim Tonne   WB6BLD