[Amps] Glued meters !

[Peter Voelpel]

The meters in the Tentec Titan were always glued, but no idea of their newer
designs.
Hsu did not talk about glued meters in AL811s either

73
Peter 

-----Original Message-----
From: amps-bounces at contesting.com [mailto:amps-bounces at contesting.com] On
Behalf Of Tom W8JI
Sent: Donnerstag, 5. Oktober 2006 01:19
To: Jim Tonne; Larry Carman; amps at contesting.com
Subject: Re: [Amps] Glued meters !

>> I've mounted relays to chassis using clear silicon calk. 
>> [snip]
>
> So have I, as a matter of fact.  But the original comment was whether 
> this kind of thing is acceptable on a
> *commercial*
> unit.

If you read later posts, Hsu then said it **wasn't glued** in the AL-811.

Quite frankly I can't remember if any units ever shipped with the meters
just glued. I know an initial prototype S/N
0001 I have here has the meters taped in.

I looked at a S/N that would correspond to the 100th unit built (around the
1990 time frame) and the meters have brackets.

So let's not get too carried away with this. Does ANYONE have on glued in,
or was this just another rumor that was started??

73 Tom





_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps