[Amps] SB-200 circuit breaker
Tom Osborne
w7why at verizon.net
Sun Aug 26 21:51:42 EDT 2007
Hi Carl
I did that and the caps are barely warm, but the bleeders are really hot.
Too hot to touch.
Tom W7WHY
> - Leaky filter caps. A very good possibility if they are original. Leave
> the amp on for a half hour or so and then shut off. Make sure the >HV is
> down to zero and pull the plug. Feel the caps. If they are more >than
> just barely warm they should be replaced.
More information about the Amps
mailing list