[Amps] SB-200 circuit breakers

[Gudguyham at aol.com]

In a message dated 8/26/2007 8:23:14 P.M. Eastern Daylight Time,  
w7why at verizon.net writes:

Hi  Lou

I guess I didn't explain it right.  What I meant is that after  it cools 
down, I can manually reset the breaker.  If I push on it  right after it 
trips, it won't reset.  Actually, after a while I can  hear an audible 
'click' and then I can manually reset it.
Tom  W7WHY



OK Tom, so you are manually re-setting it.  As you explained it, I was  to 
believe it came back on by itself.  Thanks for the clarification.   Here is a 
quick test you can do,  I am pretty sure that the Sb-200 has  "fast-on" 
connections to the circuit breakers.  Or are the wires  soldered?  I don't remember.  
Anyway, you might want to switch the  wires on the CB and see if the same 
breaker kicks off or is the other one now  kicks off.  If the other one now kicks 
off, I might suspect that your fan  is getting overheated (somehow) and 
pulling that one side over the limit.   You never know, it's a quick test you can 
perform.  73  Lou



************************************** Get a sneak peek of the all-new AOL at 
http://discover.aol.com/memed/aolcom30tour