[Amps] temperature

[W7lr at aol.com]

I purchased a used HF amp with a 4-1000A but no blower.  To verify  that the 
blower I have is adequate I would like to measure seal  temperatures.  I 
believe that this can be done using Tempilaq.  How  successful is doing that?  The 
maximum seal temperatures are 150C for the  base and 200C for the plate.  To 
be conservative, I expect to use tempilaq  laquer values well below those 
temperatures.  What values of temperature do  you usually experience with an 
adequate blower?  If you have the model of  such a blower that would be helpful too. 
 Thanks.  Bob W7LR   w7lr at aol.com



************************************** Get a sneak peek of the all-new AOL at 
http://discover.aol.com/memed/aolcom30tour