[Amps] Amplifier power supply?

[David Cutter]

Magnetically I would have thought no problem, but you should consider how
you are to cool them and insulate them from each other.  If you are using 
just one central screw, you might
want to consider the mechanical strain as well.  You will know that you 
cannot clamp them between metal panels that are joined : [   the dreaded one 
turn secondary effect...

BTW your email system blocks direct emails.

David
G3UNA

----- Original Message ----- 
From: <gd0tep at safe-mail.net>
To: <amps at contesting.com>
Sent: Saturday, July 14, 2007 11:35 AM
Subject: [Amps] Amplifier power supply?


> Hi Group,
>
> Amplifier power supplies...
>
> I have two toroid transformers, both the same spec and rating, I want to
> double them up, i.e. parallel on the primary, 240v supply, and series the
> secondary windings. That in itself seems straight forward, but I also want
> to sit one toroid on top of the other, is there any reason that I can't 
> see
> that I couldn't do this?
>
> I have asked this question before, but following some PC problems here, 
> I've
> lost a lot of info... :(
>
> Any advice appreciated.
>
> 73
> Andy
> http://gd0tep.com
>
>
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps