[Amps] Looking to purchase a good 6 meter amplifier

[Bill Fuqua]

I just looked at the specifications for the Swan Mark VI  which had a pair 
of 4-400Z tubes originally.
Oddly enough it states that I operate at 1000 watts continuous DC plate 
input power on CW, RTTY and AM.
1000 watts AM is 4000 watts PEP plate input power, far beyond the 2000 
watts PEP plate input power that it state for SSB.  Did they figure the 6 
meter band was wide enough that all that splatter would not matter?

73
Bill wa4lav
.

At 03:09 PM 7/30/2007 -0400, PJPilot at aol.com wrote:
>Would like to buy a good 6 meter amplifier that could handle 40 watts of
>drive and give me about 350 watts of AM carrier power. ie: Henry 2006, or 
>a Swan
>Mark 6, or a TEMPO 6&2, Commander 1200, or an Acom1000.
>Contact : W7PJS @ _pjpilot at aol.com_ (mailto:pjpilot at aol.com)  TNX@  73's
>
>
>
>************************************** Get a sneak peek of the all-new AOL at
>http://discover.aol.com/memed/aolcom30tour
>_______________________________________________
>Amps mailing list
>Amps at contesting.com
>http://lists.contesting.com/mailman/listinfo/amps