[Amps] drive power

[Win]

I hate to come back to this subject, but I am not sure I understand the 
problem.  Is the overshoot a product of the ALC outputted from the exciter 
to the amp, or is it caused within the transceiver at significantly reduced 
power settings.

In either case I should be able to see the overshoot if I put a scope across 
the meter in my power meter.  Is that correct?.

I currently reduce my FT-1000MKV from 200 to 50 watts, when driving my old 
SB-220 amp on CW.

Win, W0LZ