[Amps] 50 Ohm Loads

[Jim Brown]

On Mon, 12 Nov 2007 13:29:50 -0500, Jim Tonne wrote:

>Bottom line in my mind is that we reallly have to
>find out what that load resistor's inductance is in
>order to calmly and rationally talk about bandwidth.

Yep. And the most practical way to do that is to measure it at RF. 
The test setup I published in my RFI tutorial to measure chokes 
would work. Most antenna analyzers would at least get us in the 
ballpark. And, of course, you could use a classic RF bridge or 
network analyzer. Then you add the capacitor and remeasure. 

73,

Jim K9YC