[Amps] MFJ tuner and SB-200 for input matching

[jeremy-ca]

Yes but the pi net values are wrong for best efficiency so dont spend a lot 
of time tuning and keep the output below 600W otherwise the switch might 
complain.

Carl
KM1H


----- Original Message ----- 
From: "Shack" <noddy1211 at sbcglobal.net>
To: "'amps'" <amps at contesting.com>
Sent: Saturday, November 24, 2007 8:53 PM
Subject: Re: [Amps] MFJ tuner and SB-200 for input matching


> Is the plate choke okay for WARC (17 meters) bands?
>
>
> -----Original Message-----
> From: amps-bounces at contesting.com [mailto:amps-bounces at contesting.com] On
> Behalf Of Bob Nielsen
> Sent: Saturday, November 24, 2007 5:25 PM
> To: amps
> Subject: Re: [Amps] MFJ tuner and SB-200 for input matching
>
>
> On Nov 24, 2007, at 2:20 PM, Gudguyham at aol.com wrote:
>
>> The SB-200 has a tuned input and such a set up should NOT be
>> needed.  WHY?
>> Lou
>>
>
> WARC bands?
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>