[Amps] MFJ tuner and SB-200 for input matching

[jeremy-ca]

Do a Google search, there are any number of threads and URL's covering that 
issue along with corrections. Way too much to cover here.

Carl
KM1H

----- Original Message ----- 
From: "Tom LeBron" <wz9l at sbcglobal.net>
To: <amps at contesting.com>
Sent: Sunday, November 25, 2007 12:38 PM
Subject: Re: [Amps] MFJ tuner and SB-200 for input matching


> Hello all, first time posting but been reading for a while. This is an 
> interesting question. My SB-200 seems to have the input that appears to be 
> off. Every time I try to tune, I have to use the radios internal tuner to 
> get an swr that's acceptable to get the drive just to get 500 watts out 
> put on the linear.
>   Not to hijack the thread, but is there a way to check the inputs on the 
> SB-200 with a MFJ tuner or Autek VA1 vector analyst.
>  Thanks Tom WZ9L
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>