[Amps] crossmodulation in PA

[Johan]

This might be of interest :

http://www.cabelcon.dk/technic/terms/PIM-english.pdf


>----- Oorspronkelijk bericht -----
>Van: Peter Chadwick [mailto:g3rzp at g3rzp.wanadoo.co.uk]
>Verzonden: vrijdag, september 7, 2007 10:46 AM
>Aan: amps at contesting.com
>Onderwerp: Re: [Amps] crossmodulation in PA
>
>Over the years, this has been a well known problem on ships at HF, especially where they run full duplex telephony. Not that many do these days in the commercial field, but the military have a lot of experience of these effects. Somewhere I've a conference paper given some 20 odd years ago from the UK MoD people on the subject, which told how they traced it on anumber of ships. I remember them having a problem because in some cases, below a certain power level it disappeared abruptly.. Fortunately, the characteristics of tetrodes generally  make the transmitter  a negligible contributor, but the external environment is another matter. Worse at sea, of course because you've  got continuous corrosion!
>
>73
>Peter  G3RZP
>_______________________________________________
>Amps mailing list
>Amps at contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
>
>