[Amps] SB-200 Circuit Breakers

[Tom Osborne]

Hi All

A few weeks back I posted about my SB-200 that kept tripping the front 
breaker and had all sorts of good hints on what to check.

Tom, W8JI, hit the nail right on the head.  I should have noticed in the 
schematic that on 110 volts, if 1 breaker tripped, the other one should 
still be on and not kill the power.

I did a check and found that both primaries were fine, but I was only 
getting continuity through 1 set of connections on the terminal strips where 
the wires were soldered.  Someone had soldered one side of one of the 
primaries and a bunch of the crap from the insulation flowed into the solder 
joint and there was no connection to one side of the primary.  All the power 
was running through one primary winding.  I unsoldered the joints, 
resoldered them and all seemed good.

I just finished up the NA Sprint running 500 watts for 4 straight hours and 
didn't trip either breaker.  Thanks for the help in getting the problem 
solved.  73
Tom W7WHY