[Amps] stability of amps

[Peter Voelpel]

That design has nothing to do with neutralization, there is none.
It´s just passive grid, I did that quite often with tetrodes and it always
worked very well for me.

73
Peter 

-----Original Message-----
From: amps-bounces at contesting.com [mailto:amps-bounces at contesting.com] On
Behalf Of kd4e
Sent: Dienstag, 25. September 2007 05:36
To: Tom Rauch
Cc: amps at contesting.com
Subject: Re: [Amps] stability of amps

To this amateur Amateur the design concept here looks really elegant:
http://www.qsl.net/ve5ri/cyclops.htm

What is the perspective of the assembled amplifier-gurus?

It sounds as though he has engineered a more-simple solution.  Have others
done this before and since and found it valid or wanting, please?

> Neutralization is a very simple concept. There are only a few ways to 
> do it correctly and so it would have to repeat in a similar 
> application. 73 Tom


-- 

Thanks! & 73, doc, KD4E
Personal: http://bibleseven.com/kd4e.html
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps