[Amps] IMD

[jeremy-ca]

----- Original Message ----- 
From: "Tom Rauch" <w8ji at contesting.com>
To: <amps at contesting.com>
Sent: Tuesday, September 25, 2007 8:37 PM
Subject: Re: [Amps] IMD


>> >If you look at the AL-1200 specs they claim 1200W with 3 
>> >tubes so no matter how anyone wants to spin it Im not 
>> >doing anything different at 750W with two.<
>>  ::The AL-1200 uses a single 3CX1200A7 and runs 1500W 
>> output using a tube having 1200W anode dissipation.  You 
>> must have a very different AL-1200.
>>>  73, Steve WB2WIK/6
> 
>>  Sorry, I meant the AL-572 which you could just as easily 
>> have found by going a bit further on their web site.
>>  Carl
> 
> You must have a very special AL752.
> 
> The normal AL-572 has four tubes.
> 
> 73 Tom 


You are correct, my mistake.

Carl