[Amps] Anyone have a plate transformer suitable for a Gonset GSB-101

[Radio WC6W]

Hi Scott,
  If they'll fit physically, that might be a good spot for a pair of "surplus" microwave oven transformers.

  Pull the shunts and run the primaries in series to lower the operating flux, lift the grounds from the secondaries and series them with a bridge rectifier.

  Just a thought!

73 & Good morning,
  Marv WC6W 

http://wc6w.50webs.com/


--- On Sun, 8/24/08, Scott McGrath <mcgrath at fas.harvard.edu> wrote:

> From: Scott McGrath <mcgrath at fas.harvard.edu>
> Subject: [Amps] Anyone have a plate transformer suitable for a Gonset GSB-101
> To: "amps" <amps at contesting.com>
> Date: Sunday, August 24, 2008, 12:57 PM
> Hi,
> 
> Any one have a plate transformer lying around with the
> following specs
> 
> Primary 110V
> 
> 1800-2200 VCT @ 600-800MA
> 
> Found a nice but partially stripped Gonset GSB-101 amp at
> local hamfest
> 
> - Thanks Scott
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps