[Amps] Meter Face Making

[David G4FTC]

> 
> I am trying to make some new meter scales using the trial version of the 
> Tonne software called "Meter". I am trying to make a center zero scale. 
> What I want is 100ma - 0 - 100ma. I can't find on the Tonne software where 
> this can be done. It makes the zero on the left end of the scale only. Am 
> I missing something? Can someone direct me to free software that can do 
> this?
> 

 
When I made some meter scales a few years back, I simply scanned the old meter
scale using a flatbed scanner, and modified the calibration lettering using
Photoshop, but any image editing software should do.
 
I then printed the new meter scales on "Avery" self adhesive labels and stuck
on the reverse of the old meter scale.
 
Why the reverse - in case I wanted to reuse the meter with the old scale as
I was concerned if the adhesive may damage the original printing.
 
 
Regards
 
David G4FTC
_________________________________________________________________
 Live Search presents Big Snap II - win John Lewis vouchers 
http://clk.atdmt.com/UKM/go/117442309/direct/01/