[Amps] A One Tube Radio

[Fuqua, Bill L]

This may be the right place to discuss this radio since it takes a very large signal for it to work. You will need an amplifier
to get the field strength needed.  Just read the paper. Also it requires a several hundred volt very stable adjustable power supply
to make it work.  Not included in the nano radio. The high voltage tunes it and provides the intense field needed at the tip of the
nanotube to detect the vibrations due to radio waves interacting with the nanotube. There are going to be applications but not as
a radio receiver. Perhaps it can be used as a tuneable filter or a set of nanotubes could be made to make a real time spectrum analyzer.


73
Bill wa4lav

________________________________________
From: amps-bounces at contesting.com [amps-bounces at contesting.com] On Behalf Of Radio WC6W [wc6w_amps at yahoo.com]
Sent: Monday, January 21, 2008 11:16 AM
To: amps at contesting.com
Subject: [Amps] A One Tube Radio

http://www.berkeley.edu/news/media/releases/2007/10/31_NanoRadio.shtml


73 & Good morning,
  Marv WC6W

http://wc6w.50webs.com/





*


      ____________________________________________________________________________________
Never miss a thing.  Make Yahoo your home page.
http://www.yahoo.com/r/hs
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps