[Amps] MLA-2500

[jeremy-ca]

Somethings definitely wrong then.

Id start by closely inspecting the bandswitch and plate choke.

BTW, the cover has to be in place when tuning, the steel that close to the 
coil has a huge effect.

Carl
KM1H


----- Original Message ----- 
From: <n4zed at comcast.net>
To: <Amps at contesting.com>
Sent: Friday, January 25, 2008 9:21 AM
Subject: Re: [Amps] MLA-2500


> Yes on all bands.
>
> *****************************************************************************
>
> On what bands?
>
> 73, Pete N4ZR
>
> At 09:01 AM 1/25/2008, you wrote:
>>I am in the process of adding Rich's (AG6K) parasitic suppressor kit to my
>>Dentron MLA-2500 and while I'm at it I want to address the apparent
>>mis-loading of the amplifier.
>>
>>I know others have noted that the amp requires full mesh on the loading
>>cap to achieve full output, mine has the same "problem".
>>
>>Has anyone found a fix to this apparent problem?
>>Does it need "fixing"?
>>Should I worry about it?
>>
>>Thanks
>>Ken
>>n4zed
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>