[Amps] Model 86 Bandswitches

[Radio WC6W]

Hi Dennis,
  Some of those switches employ roll pins and some use
drift pins.  

  Both can easily be driven out with a small pin
punch.    If you don't have a punch of the correct
diameter you can grind down a 1/16" tool.  Just
support the shaft on a piece of hard foam or soft
wood.  

  Note that the drift pins have to be driven from the
small end.

73 & Good evening,
  Marv WC6W

http://wc6w.50webs.com/
  



--- Dennis W0JX <w0jx at yahoo.com> wrote:

> Anyone out there have any tips on how to get the
> pins out of the rotor and shafts of old RF
> Switch/Multitech band switches without wrecking
> them?
>    
>   73, Dennis W0JX
> 
>        
> ---------------------------------
> Be a better friend, newshound, and know-it-all with
> Yahoo! Mobile.  Try it now.
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> 



      ____________________________________________________________________________________
Never miss a thing.  Make Yahoo your home page. 
http://www.yahoo.com/r/hs