[Amps] Basler Electric Transformer

[Mel]

Thanks Gary, I have already shot them an email, I hope they get to it soon.
 
I am looking at my Radio Amateur's Handbook for the year 1977; they have a formula for estimating the wattage capacity for an unknown transformer.  You multiply the area of the windings times the thickness of the laminated core and compare the product to a graph for the answer.
 
Problem with the formula and the graph is that it only goes up to "4" being about 500 watts while, I have a product of "35".  It's kind of hard to extrapolate the chart past the 1000 watt point.
 
Mel

--- On Sun, 7/20/08, Gary K9GS <garyk9gs at wi.rr.com> wrote:

From: Gary K9GS <garyk9gs at wi.rr.com>
Subject: Re: [Amps] Basler Electric Transformer
To: amps at contesting.com
Cc: itz_da_police at yahoo.com
Date: Sunday, July 20, 2008, 12:04 PM

Hi Mel,

Basler is alive and well in Highland, IL.  I'll bet that a call to their 
applications engineering people can get you what you need.  Here's a link
to 
their site:

http://www.basler.com/

73,

Gary K9GS


----- Original Message ----- 
From: "Mel" <itz_da_police at yahoo.com>
To: <amps at contesting.com>
Sent: Sunday, July 20, 2008 10:29 AM
Subject: [Amps] Basler Electric Transformer


Greetings,

I have a transformer labled "BE-9370". It was made by Basler
Electric, it 
has a split 220 volt primary and a high voltage secondary.

The core dimensions are, L: 7.0 in., W: 7.0 in., D: 5.0 in.

The windings dimensions are, L: 9.5 in., W: 4.0 in., D: 7.0 in.

I am trying to find info on the secondary voltage/current rating and what 
was the original application for this transformer. Any help would be 
appreciated.

Thanks in advance,

Mel
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps