[Amps] Re Choke Formers..

[Larry]

The best way I've found to hold the wire ends is Scotch thermosetting 
glass tape. I forget the number offhand, but it should be easy to find. 
It also works real good for making chimneys with Teflon or silicon sheet.

I have also used various epoxy products with success as well as Kapton 
tape. I try very hard to avoid any metal on the choke other than the 
wire itself and the screw/lug at the very top.

Several examples of chokes made with fiberglass and Teflon rod with 
thermosetting tape can be seen in the amp pix on my web page.

Larry


Larry - W7IUV
DN07dg
http://w7iuv.com